It's not a light frame, Or notably stiff...... But just look at it, It's fri66in' adorable !!!! :) I built it up the day it arived. You'll need a Runcam Micro sized camera to go in the front as there's only 19mm between the side mounts. It'll take a 30.5 or 20mm stack, But headroom's a bit limited at 25mm between frame plates. With a micro VTX at the back, a 4 in 1 ESC and a small RX it's an easy build. I opted for an underslung battery on mine because the upswept blade tips on the iFlight Nazgul T3061's I'm using would get a bit too close to a top mounted battery for my liking. I've added a couple photos of the frame (Plus motors and props) fo scale. Ones next to my 220 Martian, And the other's with a full sized GoPro-A-like sitting on top, The others are of it finished (Without an FPV camera so far) with Racerstar BR1407 3500KV motors, A Racerstar 20A 4 in 1 ESC (Yeah, I know, It's a bit overkill for this, But I had it handy) an F3 omnibus FC, an Eachine VTX03, And a FlySky X6B RX. I've got one of the Eachine SpeedyBee CCD FPV cameras on the way to me for this to. I've also fitted one of the Realacc battery protection boards as I spend a few quid on Li-Po's and would rather not belly flop them into the ground without protection in an abrupt landing. As I said at the start, It's not a particularly stiff or light frame (The LT130 is probabbly a little better in both regards), But the finished quad is comically cute, and a fun addition to my Martian collection.

It's not a light frame, Or notably stiff...... But just look at it, It's fri66in' adorable !!!! :) I built it up the day it arived. You'll need a Runcam Micro sized camera to go in the front as there's only 19mm between the side mounts. It'll take a 30.5 or 20mm stack, But headroom's a bit limited at 25mm between frame plates. With a micro VTX at the back, a 4 in 1 ESC and a small RX it's an easy build. I opted for an underslung battery on mine because the upswept blade tips on the iFlight Nazgul T3061's I'm using would get a bit too close to a top mounted battery for my liking. I've added a couple photos of the frame (Plus motors and props) fo scale. Ones next to my 220 Martian, And the other's with a full sized GoPro-A-like sitting on top, The others are of it finished (Without an FPV camera so far) with Racerstar BR1407 3500KV motors, A Racerstar 20A 4 in 1 ESC (Yeah, I know, It's a bit overkill for this, But I had it handy) an F3 omnibus FC, an Eachine VTX03, And a FlySky X6B RX. I've got one of the Eachine SpeedyBee CCD FPV cameras on the way to me for this to. I've also fitted one of the Realacc battery protection boards as I spend a few quid on Li-Po's and would rather not belly flop them into the ground without protection in an abrupt landing. As I said at the start, It's not a particularly stiff or light frame (The LT130 is probabbly a little better in both regards), But the finished quad is comically cute, and a fun addition to my Martian collection.

It's not a light frame, Or notably stiff...... But just look at it, It's fri66in' adorable !!!! :) I built it up the day it arived. You'll need a Runcam Micro sized camera to go in the front as there's only 19mm between the side mounts. It'll take a 30.5 or 20mm stack, But headroom's a bit limited at 25mm between frame plates. With a micro VTX at the back, a 4 in 1 ESC and a small RX it's an easy build. I opted for an underslung battery on mine because the upswept blade tips on the iFlight Nazgul T3061's I'm using would get a bit too close to a top mounted battery for my liking. I've added a couple photos of the frame (Plus motors and props) fo scale. Ones next to my 220 Martian, And the other's with a full sized GoPro-A-like sitting on top, The others are of it finished (Without an FPV camera so far) with Racerstar BR1407 3500KV motors, A Racerstar 20A 4 in 1 ESC (Yeah, I know, It's a bit overkill for this, But I had it handy) an F3 omnibus FC, an Eachine VTX03, And a FlySky X6B RX. I've got one of the Eachine SpeedyBee CCD FPV cameras on the way to me for this to. I've also fitted one of the Realacc battery protection boards as I spend a few quid on Li-Po's and would rather not belly flop them into the ground without protection in an abrupt landing. As I said at the start, It's not a particularly stiff or light frame (The LT130 is probabbly a little better in both regards), But the finished quad is comically cute, and a fun addition to my Martian collection.

Small and funny. Easy to assemble.

Small and funny. Easy to assemble.

Small and funny. Easy to assemble.

hermoso el frame muy biek terminado rrsistente

hermoso el frame muy biek terminado rrsistente

hermoso el frame muy biek terminado rrsistente

lowered top plate with 20mm stand offs. winter time here. can't wait to fly it.

lowered top plate with 20mm stand offs. winter time here. can't wait to fly it.

lowered top plate with 20mm stand offs. winter time here. can't wait to fly it.

love this frame its so cute

love this frame its so cute

love this frame its so cute

It's as stiff as xjb 145 frame. Great 3 inch frame. Uses m3 hardware... All the parts weights are in the photos.

It's as stiff as xjb 145 frame. Great 3 inch frame. Uses m3 hardware... All the parts weights are in the photos.

It's as stiff as xjb 145 frame. Great 3 inch frame. Uses m3 hardware... All the parts weights are in the photos.

Looks really good! Assembly is easy. Just like the bigger martian frame. No complaints at all!

Looks really good! Assembly is easy. Just like the bigger martian frame. No complaints at all!

Looks really good! Assembly is easy. Just like the bigger martian frame. No complaints at all!

A micro martian what more could you want? Rocking 1408-3600 motors with it. Very fun.

A micro martian what more could you want? Rocking 1408-3600 motors with it. Very fun.

A micro martian what more could you want? Rocking 1408-3600 motors with it. Very fun.

ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto

ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto

ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto ottimo prodotto

Szép kis keret, elfér 20x20 vagy 30x30 kötegben. Ez ugyanaz, mint a nagy 5" marsi design.

Nice little frame, it can fit 20x20 or 30x30 stacks. It is the same as big 5" Martian design.

Szép kis keret, elfér 20x20 vagy 30x30 kötegben. Ez ugyanaz, mint a nagy 5" marsi design.